FEATURES
10/100/1000M smart media converter
1*1000M optical port ,1*10/100/1000M RJ45
1000M Dual fiber Singlemode,1310nm,SC, 0~20KM
Support LFP function, Auto MDI / MDI X
LFP (Link Fault Pass-Through) for indication of a link failure on the transmitting path of the FX receiving circuitry.
Supporting Far End Fault function on FX port
Supporting Transparent to 802.1Q VLAN tagged packets
Supporting the transmission of extra-long packets up to 1600 bytes
Supporting store and forward mode / transparent transfer mode selectable by DIP switch
Provides user accessible settings for TP port configuration, disabling link fault pass-through function
Extremely low power consumption (less than 2W), low heat, reliable quality, stable performance, and long lifetime
Newbridge®10/100/1000M media converter with external power supply are designed to transmit and receive 10/100/1000Mbps data over optical fiber. The electrical interface will Auto-Negotiate to a 1000Mbps or 1000Mbps Ethernet rate without any adjustments. The optical interface operates at a 1000Mbps Ethernet rate. Both are environmentally hardened to operate in extreme temperatures. LED indicators are provided for confirming equipment operating status.
Specially:This equipment also supports fixed 1000M ethernet rate with the DIP switch
Parameters | Specifications |
Standards | IEEE 802.3 10Base-T |
Transmission Distance | 1000M Dual fiber Singlemode,1310nm,SC, 0~20KM,Stand alone |
Port | 1* 1000M optical port ,1*10/100/1000M RJ45 |
MDI/MDI-X | Support LFP function, Auto MDI / MDI X |
Mac address table | 4K |
Memory buffer | 256K |
Forward / Filter Rate | 10M: 14,880/14,880pps |
Power Supply | External : 5V DC 1A/2A Built-in: 90 V to 240 V AC 50Hz to 60 Hz Power Consumption : ≤5W |
Operating Temperature | 0 °C to +65 °C |
Storage Temperature | -20 °C to +65 °C |
Relative Humidity | 5% to 90% (non-condensing) |
Dimensions | 95mm * 70 mm * 25mm |
FDIP SWITCH
*Toggle ON pin 1 to LFP is enable; OFF is disable
*Toggle ON pin 2 to Store and forward switch is enablel;OFF pin 2 to Modified cut-through switch mode is enable
*Toggle ON pin 3 to auto-negotiation mode is enable;OFF pin 3 to force the TX port work 10/100/1000Mbps,full/ half duplex
*Toggle ON pin 4 to TX is work 10Mbps, OFF is 1000Mbps
